Meets: - EN-ISO-13433-2006, BS6906: Part 6
Method to determine the resistance of geosynthetics to penetration by steel cone dropped from a fixed height, as a simulation of dropping sharp stones on their surface. Generally applicable to all geosynthetics. However, the test principle may not be applicable to some types of products. The specimen is clamped between two steel rings. A steel cone (45° tip angle, 1000 g) is dropped from a height of 500 mm onto the centre of the specimen. The degree of penetration is measured by insertion of a graduated cone into the hole.
Note: - Electrically cone release facility also available
- On Floor Modal
- Mechanical operated (Electrical release modal also available)
- Sample Size 150 mm (Test able)
- Total Drop height 500 mm ( ± 5 mm Adjustable as per sample thickness)
- Drop cone
- Made of SS material (304)
- Weight 1000 gram
- Angle 45o tip angle
- Having rounded tip
- Measuring cone
- Aluminum materials
- Total weight 600 gram
- Having marking of 1 mm interval for better result
- 
